If the former then investing in solid midrange and pro gear makes a lot of sense. But if your aspirations are a little less serious then lightweight inexpensive consumer gear is probably quite adequate for your needs.
There are quite reasonable bargains to be found in the used marketplace. You will not get a warranty (Canon warranties are not transferrable from the initial buyer to a subsequent owner) but Canon products are generally well made. See the section below on used equipment.
being one and Brightscreenbeing another – though note that these makers do not necessarily support all of the cameras listed below.
EOS 50/50E/55/Elan II/IIE, IX, EOS 30/33/7/Elan 7/7E, Kiss 3L (Japan only) EOS 300V/Rebel Ti/Kiss 5, EOS 300D/Digital Rebel/Kiss Digital, EOS 350D/Digital Rebel XT/Kiss N Digital, EOS 30V/33V/7S/Elan 7N/7EN, Canon EOS 400D / Digital Rebel XTi / Kiss Digital X, Canon EOS 450D / Digital Rebel XSi / Kiss Digital X2, Canon EOS 500D / Digital Rebel T1i / Kiss Digital X3, Canon EOS 550D / Digital Rebel T2i / Kiss Digital X4, EOS 60D.
Photography is an expensive field to get into, as artistic endeavours go. A writer can get by with a pencil and and a dancer with shoes, but a photographer needs to buy relatively costly camera gear first. Knowing your budget and sticking to it can help you define what options are available to you.
and so on.
If so Id consider a small point and shoot rather than an EOS SLR. SLRs are much bulkier than a pocketable point and shoot. Small point and shoots are also less obtrusive. And higher-quality point and shoot cameras, particularly those with prime (non-zoom) lenses can offer quite reasonable picture quality. In ct, a high-quality point and shoot can take better pictures than an EOS SLR with a lousy lens. You lose interchangeable lenses with a point and shoot, but many people never really need to change lenses.
A-DEP requires multiple focus points and so is never available on any EOS camera with only one focus point. In this mode you arrange your image in the viewfinder such that a foreground item within your desired depth of field is covered by either the left or the right focus mark, and that a background item is covered by one of the two remaining focus marks. Press the shutter halfway and hopefully two focus marks will light up in the viewfinder telling you which items were chosen.
, is another Chinese firm selling cloned switches that closely resemble the Canon RS-80N3 product. The other, Seculine, is a Korean firm selling a video viewfinder for SLR cameras. They sell an advanced version, the ZigView R, which has a number of interesting features, such as intervalometer timing, motion sensor shutter release (an animal moves into the field of view, for example), bulb release and so on.
Are you going to travel or go hiking? If so, low-end and midrange cameras have a serious advantage in that theyre very lightweight.
In this mode the camera locks in on your subject and doesnt refocus once youve achieved focus. It wont take a picture unless youre in focus or unless the lens is in manual focus mode. Its good for shooting static subjects.
of these remotes. Note that more recently Adidt have produced a more interesting and innovative product, the R3 series of wireless remotes. These remotes use radio frequency (RF) signals rather than infrared, meaning you get much better range (up to 100 metres with one version) and you dont need line of sight. They also have keychain pocket transmitters.
and Haoda Fu. These add-on screens give you a split-circle manual focus assist with, on some versions, a microprism collar. I have not tried the Katz-Eye products, but I have a review of a Fu viewfinderon this site.
In this mode the camera starts in One-Shot mode but switches automatically to the AI Servo mode if it detects subject motion.
In this mode the camera tries to keep refocusing the lens as you track your subject. The exposure is determined when the shutter release button is fully depressed in both single and continuous winding modes. AI Servo is supposed to be able to track subjects moving to or from the camera – a feature called predictive focus.
In continuous wind mode the camera will shoot as many frames as it can for as long as you hold down the shutter release button. Until you run out of film or storage space, of course. The shooting rate depends on both the motor-drive speed of the camera (anywhere from 1 to 10 frames per second, depending on the model) and which autofocus mode the camera is in. Continuous wind mode is usually identified by an overlapping rectangle icon.
Ive heard that Canon bodies are easily broken, since theyre made of plastic and not metal.
words like Kiss. Elsewhere in the world, Canon use straightforward and sober numbers to identify their EOS cameras – the smaller the number, the more expensive the camera.
In single wind mode the camera will shoot one picture each time you press the shutter release button. Nothing happens when you continue to hold down the button. Single-frame mode is usually identified by a rectangle icon. Use this mode for shooting something static, such as a landscape. For this reason the landscape icon mode uses single frame winding.
series (EOS 1000, EOS 1000F, EOS 1000F QD, EOS Rebel, EOS Rebel S, EOS Rebel S Quartz Date, EOS 1000 QD, EOS 1000N, EOS 1000FN, EOS 1000FN QD, EOS Rebel II, EOS Rebel S II, EOS 1000S QD and EOS 1000S QDP), EOS 100/Elan. (possibly others)
To use DEP, first autofocus on a foreground item within your desired depth of field by selecting the subject and pressing the shutter halfway. dEP 1 will appear in the viewfinder. Then recompose the image and autofocus on a background item by selecting the subject and pressing the shutter halfway. dEP 2 willCameras Canon EOS Beginners appear in the viewfinder. Finally,new york asian escort compose the final image in the viewfinder and press the shutter release halfway again.
What is meant by a consumer camera versus an advanced amateur or professional camera?
With prices for digital cameras lling all the time its easier than ever to get into the world of SLR digital, with its instant feedback, lack of film processing costs, convenience and flexibility. But film still offers some advantages, including high quality images with minimal initial investment and freedom from having to process everything on a personal computer.
– NK Guy, PhotoNotes.org.
This mode essentially simulates the typical metering mode used in cameras sold in the 1970s. Such cameras average the total amount of light coming in across the whole image but give a bit more importance (weight) to the centre. Unfortunately Canon do not publish the weighting percentage and weighting diagrams for most of their cameras, so only experience will tell you how this mode works.
Very similar to spot metering, only a larger area of the image is used – typically 6.5%, 9.5% or 10%, depending on the model. Think of partial metering as a very t spot. Some cameras with multiple focus points tie the area to be metered to the currently selected focus point.
Spot meters examine a very small area (a spot) of the overall image – usually just 1% or 2% or so. Theyre popular with experienced photographers who select an area that they want to appear as light grey on the final image and use that to meter from. Spot metering is an essential tool for metering in challenging light situations, but is harder to master from the point of view of the novice. Only professional and semi-professional EOS models offer spot metering. Some also offer multi-spot metering, which allows you to select multiple spots and then average out the readings.
) photos. Note that there is a minor naming inconsistency between the RS-80N3 and its sibling, the RS60-E3.
is at its shallowest when the lens is wide open. So if you want to get a sense of the depth of field that will result from some other aperture setting you need to close the lens down physically to that setting. The depth of field preview button available on most Canon EOS cameras does just this.
EOS 5D mark II, EOS 7D.
These are affordable cameras meant to be sold to novice (snapshot) and casual photographers, usually from shopping mall/high street camera shops, discount warehouses, etc. They are lightweight cameras with a basic feature set that have been designed to be as inexpensive as possible. This doesnt mean theyre total junk – Canon design irly decent products, on the whole – but they arent meant to be durable enough for anything much more than casual use. To keep things they are also highly automated and tend to have very few manual controls, and theyre made almost entirely from plastic.
Each camera system, or product line from a given maker, is standalone and mostly incompatible with products from other makers. Assuming you want to do more with your photography than stick with a single camera and lens, I think its wise to consider what other gear the same manucturer makes, and whether that suits your goals. If youre interested I have some noteson why I personally chose the Canon EOS system when I moved into the world of autofocus cameras that addresses this point. For example, two major selling points of Canon EOS for me were that EOS equipment is readily available from camera rental shops and that Canon tend to build their new camera technology into midrange equipment quite easily, the new features reasonably affordable.
I took a photo and stuff appears around the very edge of the photo that I didnt see in the viewfinder. Why?
EOS 100/Elan, 10/10s.
These are cameras sold to experienced amateur photographers who, while not counting on their cameras to earn their living, nonetheless want somewhat more rugged and feature-laden cameras than beginners. These models arent weatherproofed and arent as tough as the all-metal pro cameras, but theyre still decent performers and offer reasonable manual controls. In the case of film cameras theyre built mostly from plastic with some metal for top shells and so on. Some of the more recent digital cameras in this range have metal bodies.
line of products. Korean maker Seculinesell a video viewfinder for SLR cameras, the ZigView R, which has a number of interesting features including intervalometer timing.
These are the expensive and solid cameras sold to photographers who make their living doing photography and require utterly reliable equipment. Theyre heavy, have a full complement of both manual and automatic controls, and the 1 series cameras are weatherproofed. Their autofocus systems are extremely rapid and are more accurate than those of lesser cameras. Bodies are built with a ir bit of metal in addition to plastic components.
(FEC). FEC allows you to adjust the light output from a flash unit, and does so independently of the ambient light metering.
For example, do you want to take closeups of flowers or insects, which would require macro lenses or other closeup devices? High-speed sports photography, which requires a camera with a st motor drive and long telephoto lenses? Bird photography, which requires very long telephoto lenses and st autofocus? Portrait photography, which requires short telephoto lenses and often the ability to use studio flash? Documentary photojournalism, which typically requires versatile lenses which can work in low light?
than the standard sensors found in other camera models. The drawback is that they require very st lenses to work. If you put a slower lens onto one of these cameras then the cross sensors revert to linear sensors which detect lines in one direction only. The upshot is that putting a slow lens on one of these cameras is a bad idea as youre not taking full advantage of its capabilities.
There is one significant drawback to this approach which you should keep in mind, however. Canon E-TTL flash biases flash exposure to the selected autofocus point. So if you focus on something with the central focus point Cameras, recompose the image by moving the camera and then take a photo theres a good chance that the flash metering will be out. In this case you should lock flash by using FEL prior to recomposing.
Evaluative metering is the most automated metering mode. In this mode the image is divided into a number of zones – usually 3, 6, 16, 21, 35, or 64. The cameras computer then looks at the metering zones and applies various algorithms (computer programs, essentially) to guess a likely exposure setting. It then chooses appropriate shutter and/or aperture settings based on these calculations. Unfortunately, Canon have not published details of how these algorithms work. Nikon, incidentally, call this type of metering matrix metering, and sometimes people use the term matrix to refer to all forms of multiple-cell computerized light metering.
to help defray some of the costs of building and maintaining this site. Thanks!.
if you find this article to be of interest or value or if you have any comments, corrections or suggestions.
range of any camera/lens combination is determined entirely by the optical properties of the lens and not the camera.
forming on the shutter blades. This stuff gums up the shutter, causing the camera to lock up when you try to take a photo.
My camera displays bC or Err 99 when I try to take a picture. What does this mean?